Reel FlexiMova mm F0K37 Series, Руководство по проектированию и установке

Страница: 28 / 84

5 Product specifications
28 of 80
FlexiMova
®
mm - Design and Installation
5.12 Residual risks
The Manufacturer informs operators that although all possible technical-
construction protective measures have been taken to make the product safe,
residual risks still remain.
WARNING
1) Do not modify product. Doing so will void the warranty.
2) Do not connect non-original spare parts, equipment and/or accessories
to the product.
3) Do not clean the product with flammable liquids or solvents.
RESIDUAL RISK NO. 2
E lectric shock hazard: failure to disconnect the frequency converter from
the mains supply network before beginning any maintenance or installation
work and failure to comply with the following guidelines may result in electric
shock:

The appropriate PPE must be worn at all times (see par. 5.13) .

Observe the correct use and maintenance procedures.
RESIDUAL RISK NO. 3
Electric shock hazard
:
electric shock may result if authorized operators
remove the central part of the heatsink or do not observe the discharge
times for the capacitors (> 10 min) after the product stops and fail to comply
with the following guidelines:

The appropriate PPE must be worn at all times (see par. 5.13) .
 Observe the correct use and maintenance procedures.
RESIDUAL RISK NO. 4
Crushing and injury hazard
:
from the product falling if authorised
operators use the product improperly and fail to comply with the following
guidelines:
 The appropriate PPE must be worn at all times (see par. 5.13) .

Observe the correct use and maintenance procedures.
To minimise exposure to the residual risks it is prohibited to use the product
improperly (see par. 5.10) .
The personal protective equipment described in this manual must be worn
at all times (see par. 5.13) .
WARNING
The appropriate PPE must be worn at all times (see par.
5.13) .
Follow the correct mounting procedures (see chap.7) .
Observe the connection conditions of the electrical energy
provider.



E lectric shock hazard: accidental contact with the connections while the
product is energised may result in electric shock if unauthorised operators
use the product improperly and fail to comply with the following
guidelines:
RESIDUAL RISK NO. 1