Do not attempt to use hardware not supplied with your hanging kit or
XHO-K15 kit as damage to your fixture could result.
Install the two XHO's included with the kit with the screws provided on the ends of the
XHO's.
Using the supplied 2-way connector plug in each of the two XHO's.
Attach the supplied power supply in your XHO-K15 kit to 2-way connector.
When plugging in the 2-way connector to the XHO's or power supply to the 2-way
connector, make sure to insert plugs until you feel them lock in place.
Make sure to locate the power supply in a safe location away from any
contact with water.
Carefully attach your fixture to the hanging cables, plug in fixture and power supply to a
GFI outlet (Recommended)
assuring a proper drip loop is employed.
Important note: Use of power strips located on floors or any location
where water can come in direct contact with them is dangerous and can
cause serious injury or fire. Make sure all electrical plugs and electrical
outlets are safely located so that water cannot splash or spill on them.
IMPORTANT NOTICE:
When installing any lighting product, power supply, or controller
do not install in a manner that will allow any part or component to come
in direct contact with water.
Reef Brite assumes no liability for improperly installed products.
