reedinstruments
www
com
7
Pantone 534 Blue
Pantone 123 Yellow
Pantone 485 Red
Pantone 123 Yellow
Pantone 534 Blue
Black
Rich Black -
20/20/20/100
Blue - 100/80/30/5
Yellow - 0/27/100/0
Red - 10/100/100/5
Yellow - 0/27/100/0
Blue - 100/80/30/5
Only if you REALLY need them:
Pantone 534 Blue - 100/80/30/5
Pantone 485 Red - 10/100/100/5
Pantone 123 Yellow - 0/27/100/
INSTRUMENTS
Operating Instructions
Type K Measurement
1. Turn on the meter by pressing the Power Button. to turn the meter
off, hold the Power Button for over 2 seconds.
2. The Meter’s default Temperature sensor is Type K, which will show
on the Display as “K”. Insert the optional Type K probes into the
T1, T2, T3, T4 input sockets. The screen will show the 4 channels
(T1, T2, T3, T4) and their temperature values. If an input socket is
empty, the screen will display “- - - - -”.
Type J/T/E/R/S Measurement
1. To change the Temperature Sensor, press the Type Button so the
screen displays “J/T/E/R/S”.
2. Insert the optional Probes into the T1, T2, T3, T4 input sockets.
The screen will show the 4 channels (T1, T2, T3, T4) and their tem-
perature values. If an input socket is empty, the screen will display
“- - - - -”.
Pt 100 ohm Measurement
1. To change the Temperature Sensor, press the Type Button so the
screen displays “Pt”.
2. Insert the optional Pt 100 ohm Probes into the PT1 and PT2 input
sockets. The screen will show the temperature values. If an input
socket is empty, the screen will display “- - - - -”.
T1-T2 Measurement
1. Insert two probes into the meter, either a Thermocouple Probe in
the T1 & T2 sockets, or a Pt 100ohm Probe in the PT1 & PT2
sockets.
2. Press the T1-T2 button and the display will show the difference
value between T1, T2 (or PT1, PT2) on the bottom right of the
screen.
uk.REED-Direct.com