reedinstruments
www
com
10
Pantone 534 Blue
Pantone 123 Yellow
Pantone 485 Red
Pantone 123 Yellow
Pantone 534 Blue
Black
Rich Black -
20/20/20/100
Blue - 100/80/30/5
Yellow - 0/27/100/0
Red - 10/100/100/5
Yellow - 0/27/100/0
Blue - 100/80/30/5
Only if you REALLY need them:
Pantone 534 Blue - 100/80/30/5
Pantone 485 Red - 10/100/100/5
Pantone 123 Yellow - 0/27/100/
INSTRUMENTS
4. Now you need to set the decimal format. The numerical data
structure downloaded to the SD card is defaulted used the “.
” as the decimal, for example “20.6” “1000.53”. But in certain
countries the “ , ” is used as the decimal point, for example “20,6”
“1000,53”. See Advanced Settings section of this manual for
instructions on how to change the Decimal Character.
Auto Datalogger (Set sampling time ≥1 second)
1. Start Datalogging; press the REC Button, and the “REC” symbol
will appear on the LCD screen, then press the Logger Button, the
“REC” symbol will flash while the measuring data and time infor-
mation is being saved in memory. to set the sampling time, and to
toggle the beeper sound on or off, refer to the Advanced Settings
section of this manual.
2. Pause the Datalogging; while Datalogging, if press the Logger
Button once. While paused, the “REC” symbol will stop flashing.
Press the Logger Button again to resume Datalogging, and the
“REC” symbol will begin to flash again.
3. Stop Datalogging; while the Datalogger function is paused, press
the REC Button for 2 seconds. The “REC” symbol will disappear
indicating the Datalogging function has stopped.
Manual Datalogger (Set sampling time = 0 seconds)
1. Set sampling time is to 0 second; Press the REC Button, and the
“REC” symbol will appear on the LCD screen. Press the Logger
Button, and the “REC” symbol will flash once and one Beep will
sound, at the same time the measuring data along the time infor-
mation will be saved in memory. The lower Display will show the
Position (record) number, which is saved as well.
2. To Change the Position Number; press the Down Button and the
lower position number will flash on the display. Press the Up or
Down Buttons to set the Position Number (1 to 99) to help identify
the measurement location. The lower Display will show P x (x = 1
to 99). After the position number is selected, press the Enter But-
ton to confirm.
continued...
uk.REED-Direct.com