reedinstruments
www
com
13
Pantone 534 Blue
Pantone 123 Yellow
Pantone 485 Red
Pantone 123 Yellow
Pantone 534 Blue
Black
Rich Black -
20/20/20/100
Blue - 100/80/30/5
Yellow - 0/27/100/0
Red - 10/100/100/5
Yellow - 0/27/100/0
Blue - 100/80/30/5
Only if you REALLY need them:
Pantone 534 Blue - 100/80/30/5
Pantone 485 Red - 10/100/100/5
Pantone 123 Yellow - 0/27/100/
INSTRUMENTS
Note
: After the time value is set, the internal clock will run even when
the power is off, if the battery is under normal conditions.
Set sampling time
1. When the lower display shows “SP-t”, use the Up or Down But-
tons to adjust the value to either 0, 1, 2, 5, 10, 30,60, 120, 300,
600, 1800, or 3600 seconds.
2. After the Sampling value is selected, press the press the Enter
Button to save the setting as the default. To exit “Advanced Set-
tings”, press the Esc Button.
Auto power OFF management
1. When the lower display shows “PoFF”, use the Up or Down But-
tons to select the value “yES” (Enable Auto Power Off) or “no”
(Disable Auto Power Off.
2. After selecting “yES” or “no”, press the Enter Button to save the
setting as the default. To exit “Advanced Settings”, press the Esc
Button.
Set Beeper Sound ON/OFF
1. When the lower display shows “bEEP”, use the Up or Down But-
tons to select “yES” (Beeper Sound is ON) or “no” (Beeper Sound
is OFF).
2. After selecting “yES” or “no”, press the Enter Button to save the
setting as the default. To exit “Advanced Settings”, press the Esc
Button.
Setting the Decimal point on the SD Card
1. When the lower display shows “dEC”, use the Up or Down But-
tons to toggle between “bASIC” (“.” Decimal Point) or “Euro” (“,”