REED R8010, Инструкция по эксплуатации, Страница: 9 / 12

reedinstruments
www
com
9
INSTRUMENTS
INSTRUMENTS
Indirect Measurement
This is used to determine a distance
using two auxiliary measurements.
Press the
INDIRECT MEASUREMENT
button once, the icon will appear
on the display.
Aim at the highest point and press
the
ON/MEASURE
button to take the
measurement. Holding the instrument
as horizontal as possible press and hold the
ON/MEASURE button to
trigger continuous measurement, the horizontal line is measured and
shown in the summary and secondary lines.
Three Point Measurement
Press the INDIRECT MEASUREMENT
button twice, the icon will appear
on the display. Aim at the highest
point (1) and press the
ON/MEASURE
button to trigger the measurement.
Holding the instrument as horizontal
as possible press and hold the
ON/MEASURE
button to trigger
continuous measurement and sweep
the laser up and down over the ideal
target point (2), press the
ON/MEASURE button again to
confirm the value. Aim at the lower
point (3) and press the
ON/MEASURE
button to trigger the measurement.
The results are shown in the summary
and secondary lines at the same time.
www.
GlobalTestSupply
.com
Find Quality Products Online at: sales@GlobalTestSupply.com