reedinstruments
www
com
7
INSTRUMENTS
INSTRUMENTS
Backlight
Press the
BACkLIghT/UNIT
button to turn the backlight on and off.
Distance Unit Setting
Hold down the
BACkLIghT/UNIT
button for a few seconds to change
the unit of measure. Continue to press the button to toggle between all
units of measure. You can choose between m, ft, in.
Single Distance Measurement
Press the
ON/MEASURE
button to activate the laser. Press the button
again to trigger the distance measurement. The measured value will be
displayed immediately.
Continuous (Tracking)/Max & Min Measurement
The continuous measurement
function (tracking) is used for the
transferring of measurements.
In continuous measurement mode,
the meter can be moved to the target,
whereby the measured value is
updated approx. every 0.5 seconds.
The corresponding max and min
values are displayed dynamically in
the first and second line.
For example, the user can move
from a wall to the required distance,
while the actual distance can be
read continuously. For continuous
measurement, press the
MAx/MIN
button until the indicator for
continuous measurements appears
on the display. Press it again or press the
ON/MEASURE
button to stop
the function. The meter resumes normal operation after 100
continuous measurements.
www.
GlobalTestSupply
.com
Find Quality Products Online at: