REED R5050 Скачать руководство пользователя страница 3

reedinstruments

www

com

3

INSTRUMENTS

INSTRUMENTS

 Safety

•  Read this manual before using the meter and follow all safety guidelines.
•  Use the meter only as specified in this instruction manual. Otherwise 

the meters protection may be impaired. 

•  Never use this meter on a circuit with voltages greater than 750Vrms @ 50/60 Hz. 
•  Do not operate the meter if the body or test leads look damaged.
•  Check the function selector range switch and make sure it is at the 

correct position before each measurement is taken.

•  Do not perform resistance and continuity tests on a live circuit.
•  Exercise extreme caution when measuring live systems with voltages 

greater than 60VCC or 30VCA.

•  Use extreme care when working around bus bars and bare conductors. 
•  Do not use the meter in over range/overload conditions (OL).
•  Change the battery when the 

 symbol appears to avoid incorrect readings.

Environmental Conditions

Altitude up to 2000 meters.
Operating Temperature: 0°C to 40°C, <80% RH, non-condensing
Storage Temperature: -10°C to 60°C, <70% RH, battery removed
Pollution Degree: 2

Symbols

Attention! Refer to operation instructions.

Dangerous voltage may be present at terminals.

This instrument has double insulation.

www.

GlobalTestSupply

.com

Find Quality Products Online at:

[email protected]

Содержание R5050














Отзывы: