reedinstruments
www
com
12
Pantone 534 Blue
Pantone 123 Yellow
Pantone 485 Red
Pantone 123 Yellow
Pantone 534 Blue
Black
Rich Black -
20/20/20/100
Blue - 100/80/30/5
Yellow - 0/27/100/0
Red - 10/100/100/5
Yellow - 0/27/100/0
Blue - 100/80/30/5
Only if you REALLY need them:
Pantone 534 Blue - 100/80/30/5
Pantone 485 Red - 10/100/100/5
Pantone 123 Yellow - 0/27/100/
Internal Power Source Measurement
1. Disconnect the test leads.
2. Set the switch to DC.
3. Press the BATT button.
4. Read the voltage value
on the LCD.
5. After 5 seconds the meter
will auto-off or press the
BATT button to turn off the
battery voltage function.
Low Resistance Measurement & Continuity Check
Do not run this test unless AC/DC = 0V. Do not use this mode to
check diodes.
1. Set the rotary switch to the Ω position.
2. Connect the red test lead
to the VΩ terminal and
the black lead to the
COM terminal.
3. Connect the tips of
the test leads to the
circuit under test.
4. Read the resistance
value on the display.
5. When the resistance
of a circuit is less
than 50Ω, the audible
tone will sound.
www.reedinstruments.com
1-877-849-2127 | [email protected]
