3
Introduction
Thank you for purchasing your REED R2800 Temperature Simulator. Please
read the following instructions carefully before using your instrument. By
following the steps outlined in this manual your meter will provide years of
reliable service.
Product Quality
This product has been manufactured to meet the stated product specifications.
If a certificate of calibration is required please contact the nearest authorized
REED distributor or authorized Service Center. Please note an additional fee for
this service will apply.
Safety
Never attempt to repair or modify your instrument. Dismantling your
product, other than for the purpose of replacing batteries, may cause
damage that will not be covered under the manufacturer's warranty.
Servicing should only be provided by an authorized service center. To
avoid injury to the user or damage to the instrument, please read the
safety information below before initial use:
• Do not operate the instrument around flammable or explosive gas,
vapor or dust.
• Never apply more than 30V between any two terminals, or between any
terminal and ground terminal.
Note:
For optimal accuracy, allow the instrument to warm up 5 minutes
before operating. If the automatic reference-junction temperature
compensation of the instrument deviates from its designed accuracy,
contact an Authorized REED Service Center.
REED Instruments
1-877-849-2127 | [email protected] | www.reedinstruments.com