reedinstruments
www
com
6
Pantone 534 Blue
Pantone 123 Yellow
Pantone 485 Red
Pantone 123 Yellow
Pantone 534 Blue
Black
Rich Black -
20/20/20/100
Blue - 100/80/30/5
Yellow - 0/27/100/0
Red - 10/100/100/5
Yellow - 0/27/100/0
Blue - 100/80/30/5
Only if you REALLY need them:
Pantone 534 Blue - 100/80/30/5
Pantone 485 Red - 10/100/100/5
Pantone 123 Yellow - 0/27/100/
INSTRUMENTS
Operating Instructions
While in DC measuring mode, North Poles (positive fields) will be repre-
sented on the screen with an “N”. South Poles (negative fields) will be
represented on the screen with an “S” and a negative sign. While in AC
measuring mode, the screen will display “AC”.
The Magnetic Probe senses either a magnetic push or pull. The sensing
area is the flat tip of the sensor.
When the measurement value is over ±3500mG, the display will show
“----” (≥ 3500mG) or “----” (≤ -3500mG).
When you first turn the meter on, the display will not show a zero value
due to the present natural magnetic field. Be sure to follow the Zero Ad-
justment procedures described in the DC Magnetic Field procedures.
DC Magnetic Field Measurement
As the device has extremely high sensitivity, the LCD display will vary
greatly even a slight movement the probe. It is recommended to firmly fix
the probe before measurement.
1) Turn on the meter by pressing the Power Button. To turn the meter,
hold the Power Button for over 2 seconds.
2) Press the Unit Button to select the unit (mG, uT).
3) Zero Adjust:
Press and hold the Zero Button until the screen displays a zero
value and an “O” symbol. To measure the environment magnetic
value, press and hold the Zero Button again and the “O” symbol
will disappear and the meter will return to showing the Environ-
ment’s magnetic field value.
4) Hold the Probe Sensor on or close to the testing material.
The Display will show the magnetic field value along with the unit
(mG, uT).
www.
.com
1.800.561.8187