13
Display
1.
To adjust the brightness of the display, drag the Brightness slider to
the right or left.
2.
Set the screen saver mode ON or OFF by tapping on the
toggle switch.
3.
To enter the screen saver timeout time, open the interactive
time options box by tapping the small arrow to the right of the
programming fi eld.
4.
Select between 10, 20, 30 or 60 seconds.
5.
Tap
SAVE
to confi rm your settings or tap on the
X
to cancel and
resume normal operation.
6.
When active, the screen-saver mode appears as shown below,
providing real-time relative humidity, air temperature, and CO
2
levels.
Note:
At any time, you can tap on the
X
to exit the Setup mode and
resume normal operation.
continued...
REED Instruments
1-877-849-2127 | [email protected] | www.reedinstruments.com
