8
www.REEDINSTRUMENTS.com
Auto Power Off
1. To preserve battery life, the meter is programmed to turn itself off
after 30 minutes of inactivity.
2. To turn this function off, press and hold the
HOLD
button while
powering on the meter.
3. Release both buttons simultaneously.
4. The Auto Power Off indicator will not appear on the display at start
up, confirming this feature is now disabled.
5. If the meter is turned off then back on, the "Auto Power Off" feature
will be enabled again.
Backlight
Press the Backlight Button to turn the LCD Backlight on and off. The
backlight will automatically turn off after 30 seconds in order to preserve
battery power.
Selecting the Appropriate Light Setting
The meter has been pre-loaded with 9 light source selections (L0-L8) each
having its own unique correction factor. See the light sources listed below.
The correction factor multipliers for L0-L7 are fixed to the specific light
sources listed, whereas, L8 is a customizable location which allows you
to set your own correction factor if a high precision light meter with "V( )"
<3% is available.
In order to select the appropriate setting, press the
button and press
the and buttons to toggle through the list of light sources. When the
appropriate light source has been selected, press the
button again to
confirm your selection and resume normal operation.
Light Sources:
L0: Standard incandescent light source
L1: LED white daylight (5000K)
L2: LED AMBER (YELLOW) light (3000K)
L3: LED GREEN light
L4: LED RED light
L5: LED BLUE light
L6: Warm White Fluorescent Lamp (4000K)
continued...
1.800.561.8187
REED-Direct.ca
