7
www.REEDINSTRUMENTS.com
Unit of Measure Selection
Press the
fc/lx
button to toggle between Foot Candles and Lux units of
measurement. Refer to
"Selecting the Appropriate Light Setting"
section
for information on the meter's pre-set correction settings according to the
light source under test.
Note:
1fc=10.76lx
Measurement Range Selection
Press the
RANGE
button to select the preferred measuring range. The
available ranges are: AUTO, 200, 2000, 20000, 200000 lx / AUTO, 20, 200,
2000, 20000 fc.
Data Hold
1. While taking a measurement, press the
HOLD
button to freeze the
current readings on the display.
2. While in this mode a "HOLD" symbol will appear.
3. Press the button again to resume normal operation.
MIN/MAX
1. Press the
MIN/MAX
button to enter the MIN/MAX function.
2. The "MAX" indicator will appear on the display.
3. Under this function the maximum light value is displayed and
updated when a new maximum data value has been taken.
4. Press the
MIN/MAX
button again and the "MIN" indicator will appear
on the display.
5. Under this function the minimum light value is displayed and updated
when a new minimum data value has been taken.
6. Press the
MIN/MAX
button a third time and both the "MIN & MAX"
indicators will blink continuously.
7. Under this function the maximum & minimum values will continue to
be updated in the memory while displaying the current light value.
8. To exit the MIN/MAX function, press and hold the
MIN/MAX
button
for three seconds.
continued...
1.800.561.8187
REED-Direct.ca
