8
1. Press the
MIN/MAX
Button once to display the maximum value.
2. Press the button again to display the minimum value.
3. Press and hold the button once more to resume normal operation.
Auto Power OFF
To preserve battery life, the meter is programmed to turn itself off after 30
minutes of inactivity. To turn this function off, while the meter is off, press
and hold the
FAsT/slOw
Button while turning the meter on. When the
meter turns on release both the
FAsT/slOw
Button and Power button.
The Auto Power Off indicator will not appear on the display, confirming
this feature is now disabled. If the meter is turned off then back on, the
"Auto Power Off" feature will be enabled again.
NOTE:
The Auto Power Off is disabled during data logging or when the
meter is connected to a PC.
Backlight
Press the Backlight Button to turn the LCD Backlight on and off. The
backlight will automatically turn off after 30 seconds.
Setting the Date and Time
In order to set the time and date on the meter, follow steps 1 through 5.
1. While the meter is off, enter the Setup mode by pressing and holding
the Power Button and A/C buttons simultaneously. "Set" will flash on
the display indicating you are in the Setup mode.
2. Press the
MIN/MAX
(Clock) button to enter the time and date
setup screen.
3. Press the Up and Down arrows to adjust the year.
4. Press the
MIN/MAX
(Clock) button again to toggle through Month,
Day, Hour (24-hours), Minutes and Seconds. During each selection
the Up and Down arrows can be used to adjust the selected value.
5. Press the
MIN/MAX
(Clock) button after seconds to save and exit
the Setup mode.
NOTE:
Press the Power button to exit Setup mode at any time.
REED Instruments
1-877-849-2127 | [email protected] | www.reedinstruments.com
