16
Internal Memory Operation
The internal memory is divided into 5 files, F1 to F5. Each file can save up
to 100 measurement values.
Note:
Before saving your data, be sure to set the file number first.
1. Press the
button to highlight the "Save File Name" on the LCD.
2. Press the
button to scroll through the memory files, F1 to F5.
3. Press the
button to save and exit.
Reviewing Stored Data
1. Press the
button to highlight the "Save File Name" on the LCD.
2. Press the
button to scroll through the memory files, F1 to F5.
3. Press the
button to select the appropriate file number and to view
the saved values.
4. Press the
and
buttons to scroll through the saved values.
5. If required, press the
button to erase the current saved value.
Maintenance
Cleaning the Test Piece
After taking a measurement, clean the test pieces to prevent them from
rusting. If the pieces are not to be used for a long period of time, coat
them with oil to prevent rust.
Protecting the Ultrasonic Sensor
Be sure to clean the ultrasonic sensor and cable after each use. Grease, oil
and dust will cause the cable to dry out and shorten life expectancy. The
temperature of the surface being measured should not exceed 140°F (60°C).
Replacing the Ultrasonic Sensor
The degradation and wear of the probe's interlayer plate will influence
measurements. Replace the probe when the following occurs:
• If it always displays the same value when measuring different
thicknesses or;
• When a measurement displays no value.
www.
.com
1.800.561.8187
