9
Operating Instructions
Power ON/OFF
Turn the meter on by pressing the
POWER
button. To turn the meter off,
press and hold the
POWER
button for 2 seconds.
Note:
This meter can be powered by either six (6) "AA" batteries or AC
adapter (sold separately).
Vibration Sensor
1. Plug in the BNC cable into the BNC input socket.
2. If the material under test is non-ferrous, place the vibration sensor on
the surface to take a measurement.
3. If the material under test is ferrous, connect the magnetic base to the
vibration sensor. Place the vibration sensor and magnetic base on
the surface to take a measurement. Do not touch the sensor cable
when taking measurements.
Selecting Measurement Modes
The R7000SD has 3 measurement modes:
• Root Mean Square: Measures Acceleration and Velocity
• PEAK: Measures the Peak value of vibration
• MAX HOLD: Measures and updates the maximum Peak Value
1. When the meter is on, press and hold the
FUNCTION
button to
toggle between "RMS", "Peak" & "Max HOLD".
2. Release the
FUNCTION
button to confirm selection.
continued...
REED Instruments
1-877-849-2127 | [email protected] | www.reedinstruments.com
