10
Note
: "in" (indoor= without direct sun exposure) and "out"
(outdoor= with direct sun exposure) modes.
3. While in measurement mode, hold "in/out" button to toggle between
indoor or outdoor measurements.
4. To set the WBGT alarm, see
Setting WBGT Alarm Value
for details.
Wet Bulb Temperature Measurement Mode (_b)
1.
Select the "_b" function (see
Selecting Measurement Modes
for details).
2. The top part of the display will indicate the WB value while the lower
part of the LCD display will indicate "_b" as shown below.
F
Dew Point Measurement Mode (dP)
1. Select the "dP" function (see
Selecting Measurement Modes
for details).
2.
The top part of the display will indicate the Dew Point value while the
lower part of the display will indicate "dP" as shown below.
F
continued...
REED Instruments
1-877-849-2127 | [email protected] | www.reedinstruments.com