3
Introduction
Thank you for purchasing your REED R5110 Non-Contact Voltage
Detector. Please read the following instructions carefully before using your
instrument. By following the steps outlined in this manual your detector
will provide years of reliable service.
Product Quality
This product has been manufactured in an ISO9001 facility and has
been calibrated during the manufacturing process to meet stated
product specifications.
Safety
• Never attempt to repair or modify your instrument. Dismantling your
product, other than for the purpose of replacing batteries, may cause
damage that will not be covered under the manufacturer's warranty.
Servicing should only be provided by an authorized service center.
• Do not use the product if it appears to be damaged or isn't
operating properly.
• Do not apply more than the specified voltage.
• Before each use, verify operation by testing a known working circuit
that is within the rating of this unit.
• Operation may be affected by differences in socket design and type.
• Low voltage mode (24V AC~1000V AC) is suitable for testing
low-voltage motors (< 90V), audio systems, arc welding machines,
underground mine lighting, cables with thick insulation, and other weak
electromagnetic AC signals.
• High voltage mode (90V AC~1000V AC) is suitable for detecting urban
electric supply and three-phase systems such as power distribution
units, electrical panels and electrical appliances.
www.calcert.com
1.800.544.2843
0
5
10
15
20
25
30
