9
Capacitance Measurement
1. Set the function dial to the
position.
2. Press the
SELECT
button to select capacitance
as indicated by "nF" on the LCD display.
3. Measure the capacitance by touching the test
probe tips to the load in parallel.
4. Note the measured value.
Frequency Measurement
1. Set the function dial to the
position.
2. Press the
HZ
button to select frequency as
indicated by "Hz" on the LCD display.
3. Measure the frequency by touching the test
probe tips to the load.
4. Note the measured value.
Diode Measurement
1. Set the function dial to the
position.
2. Press the
SELECT
button to select diode as
indicated by
on the LCD display.
3. Measure the frequency by touching the test
probe tips to the load in parallel.
4. Note the measured value.
Forward voltage will indicate 0.5V to 0.8V. Reverse voltage
will indicate “OL”. Shorted devices will indicate near 0mV
and an open device will indicate “OL” in both polarities.
continued...
Compact Multimeter
NCV
R5099
AUTO
nm FVA Mk
AC
DC
Hz %
Ω
H
SELECT
HOLD
Hz %
Compact Multimeter
NCV
R5099
AUTO
nm FVA Mk
AC
DC
Hz %
Ω
H
SELECT
HOLD
Hz %
Compact Multimeter
NCV
R5099
AUTO
nm FVA Mk
AC
DC
Hz %
Ω
H
SELECT
HOLD
Hz %
REED Instruments
1-877-849-2127 | [email protected] | www.reedinstruments.com
