86
3.8 Myzone Naked 410 remote
-
Configuration
3. To pair a wireless sensor to the system:
a) Set the dial inside the sensor to the correct zone number.
Press and hold the pair bu on in the sensor
b) On the remote—Press and hold the zone bu on then
press the pair bu on. The blue LED on the sensor will
flash rapidly to indicate it is pairing.
4. To force the system to Auto configure:
a) Press and hold the up bu on then press and release the
pair bu on.
b) Zones 12, 13, & 14 will flash rapidly indica ng the system
is Auto configuring.
c) It will take around 5 minutes to complete Auto
configura on as it needs to receive data from each of the
zone sensors
1. To pair the remote to the system .
Press and hold the pair bu on on the
remote and at the same me press the
pair bu on on the CM225 module . Zone
1 will flash blue rapidly. You can also
press the AC pair bu on on a touch screen
if one is fi ed to the system.
Note:
Zone 1 will be set as the
default constant zone when
Auto configured.
Hint:
Configure in this order:
1.
Pair the remote to the CPU
first.
2.
Then set the dial in the
zone sensors to the correct
zone number.
3.
Pair each sensor to the
system.
4.
Force Auto configuration
5.
Test air flows to each zone
and fit zone labels onto the
back of the remote.
6.
Test sensors by pressing
the sensor button to ensure
the correct zone is set to
Climate control.
