Plumbers, please ensure a copy of the installation instructions
is left with the end user for future reference
CARE AND MAINTAINANCE
All Rifco Vanities are manufactured from water resistant materials but are
not waterproof
.
Care must be taken to immediately dry any spillage or leakage of water.
Please also ensure bathroom is well ventilated and out of direct sunlight for long periods of time.
SOLID TIMBER:
The timber used to manufacture the vanity has been kiln dired and sourced from sustainable and
managed forest/mills. It has been coated with multiple layers of laboratory tested clear 2- part
polyurethane so your timber vanity is protected from most household chemicals, detergents, oil, hot or
cold water spillage. Maintaince is very minimal - just wipe down with a clean cloth to remove pooled
water or built up bathroom products regularly. Avoid using products with cutting agents as this may
result in varying lustre in the coating.
As this is a natural product, keep the timber sealed and if the 2- part polyurethane finish is damaged.
make sure it is resealed immediately. For further information, please contact your place of purchase.
CORIAN®:
Your Corian® countertop is finished with a matte/satin finish. A key to keeping your countertops
looking good is to thoroughly rinse and wipe completely dry after cleaning. For most residues, all you
need to clean your Corian® countertops is warm soapy water, ammonia-based household cleaner, or
a dedicated countertop cleaner found at your local supermarket.
Do avoid window cleaners, however, as they can leave a waxy build-up that dulls the surface.
Experience has shown that a film builds up on the surface if water is left to dry on the countertop.
This film will dull the look of the countertop making the finish appear blotchy and uneven. To prevent
build up of the film, it is very important to wipe the countertop completely dry after spills and cleaning.
page 3 of 3
K A D O
Kado Arc Timber Vanity
K A D O
Kado Arc Timber Vanity