4
CV4501
45A Power converter / charger
Control panel
Lights
Buttons
LED display
1
Tail lights
2
Marker lights
3
Left signal
4
Right signal
5
Auxiliary
6
Brake
7
Emergency
8
Service
Option
Future use
ON/OFF Light is turned on when
the device is ON and
flashes when it is in the
remote
programming
mode
B1
To switch manually from
one electrical function to the
other
B2
To activate EMERGENCY
manually
B3
To activate SERVICE
manually. Emergency
function has to be activated
for the service function to
work.
B4
Press to turn the device ON
and OFF.
When turning the device
ON, hold for 5 seconds to
enter the remote
programming mode.
The LED screen flashes for a few
seconds when the device is turned
on. At that time, the screen displays
the battery voltage. If the device is
used with our CV4501 power
converter / charger, and the CV4501
is plugged into a 120V outlet, the
display shows the voltage given by
the CV4501.
When the LED screen steadies, the
amperage draw is now displayed.
FrE:
When the LED display
shows these letters, the T05 is in
FREEZE mode.
Refer below
to the
"FREEZE" function on the 15-
function
remote
for
more
information.
The corresponding light will blink when a short circuit is detected in an activated circuit. At the
same time, the device will emit an audible signal until the short is repaired.
If the light only blinks without a audible signal, it may be because you have activated the
optional output of this circuit.
B2
B1
B1
B3
B4
