Redrover SDM-080, Руководство пользователя

Страница: 23 / 34

Stereoscopic driver installation guide
23
1) Click “Stereo Properties” from the left menu
2) Select “Enabled” from Stereo Enable Mode
3) Set the value to 10% on Stereo Separation bar
4) Select Dual VGA Output(Dep3D) in Stereo Type
5) Click “Stereo Setup & Test” from the left menu
① Set the “Stereo Refresh Rate” to “60”
② Click “Set Rate For All Resolutions”
③ Click Always use Stereo Refresh Rate. Then Click “Apply” button
※ This procedure must be done in specific order otherwise the installation must start from the
beginning. And it show “Out of Range” message.