Redring RP12PT, Руководство пользователя

Страница: 2 / 12

2
Important Safety Instructions
When using this electrical equipment, basic safety precautions should always be followed,
including the following:
1. Read and follow all instructions.
2. This appliance must be grounded.
3. Disconnect this product from the electrical supply before cleaning, servicing or removing the
cover.
4. lo reduce the risk of injury, close supervision is necessary when the product is used near
children or elderly persons.
5. Warning: Do not install the heater in a location where it may be subject to freezing.
6. Warning: Do not install a check valve or any other types of back flow preventer within six
feet of the cold water inlet.
7. The electrical insulation must conform to current National Electrical Codes.
8. Warning: Do not switch the heater on if you suspect that it may be frozen. Wait until you are
sure that it has completely thawed cut.
9. The Powerstream Pro is designed to heat potable cold water for domestic purposes.
Contact Bosch Water Heating before specifying or installing the appliance in any other
application.
10.
Additional Canadian Safety Instructions
a) A green terminal (or wire connector marked "G", "GR", "GROUND", or
"GROUNDING") is provided within the control box. To reduce the risk of electric shock,
connect this terminal or connector to the grounding terminal of the electric service of
supply panel with a continuous copper wire in accordance with the Canadian Electrical
Code, Part 1.
b) This product shall be protected by a Class A ground fault circuit interrupter.
Contents
Using the Powerstream Pro 3
Installing the Powerstream Pro 3
Spare parts 5
Starting up the Powerstream Pro 6
How the Powerstream Pro works 7
Trouble shooting 8
Warranty Back
Cover
Save these instructions
Keep this guide in a safe place once your Powerstream Pro unit has been installed. You may need
to refer to it for general instructions or future maintenance.