Wireless Connection
1. Take out the USB receiver in the package and plug it into any available USB port on your
computer.
2. Slide the power switch on the bottom of the mouse to Power On with LED ON or Power On
without LED.
3. The computer will recognize and configure the keyboard automatically.
4. The mouse will be ready for use when the configuration is finished. The LED of the LOGO
and the lower edge will light on then if the power switch on the bottom of the mouse to
Power On with LED ON
5. The mouse can work about 9 hours with LED backlight be OFF, and about 2 hours with
LED backlight be ON. The scroll wheel light will flash when battery is low
6. Recharge the keyboard when the battery is low.
How to Select DPI
The two buttons on the top of mouse are set to DPI+ / DPI – as default.
How to Switch the Working Mode
There are two working modes for the mouse. You can change the working mode with the
mode button on the bottom of the mouse. When you press the mode button, the scroll wheel
flashes in blueviolet four times slowly or quickly, and the polling rate of the mouse was set to
125Hz or 1000Hz correspondingly. The dpi value , backlight effects and button functions can
be set via software for each working mode.
How to Recharge the Battery
When the battery is low, please recharge the batter in time.
Take out the USB to USB C cable and connect the mouse and any USB power output
port. While the battery is under recharging, the scroll wheel lights up and flash firstly in red
(if the battery is very low), then in yellow and finally lights steadily on in yellow when the
battery is fully recharged. Meanwhile the side edge light lights up and expands from back
to front in red till the battery is fully recharged.
The battery can be recharged for more than 300 cycle times. And you can use the mouse
while it is under recharging.
Note: Slide the power switch on the bottom of the mouse to OFF for long term storage.
CAUTION: DO NOT CHARGE THE MOUSE BY WALL
PLUG ,INPUT VOLTAGE MAX 7V.
How to Reconnect the Mouse the with the USB Receiver
