21
Angle Brackets
The aluminium angle brackets are bolted to the cill and then with the use of screws are secured to the base.
Timber screws are available on request.
5 BLADE LOUVRE
LOUVRE MODEL CONTAINS
PROCEDURE
1.
Place top cill into position on side jamb of louvre and secure with self tapping screws.
2.
Do same on the other top corner.
3.
Do same with bottom cill.
4.
Please note that the handle is on the right hand side, the above diagrams are viewed from the inside.
5.
To fit the louvre to the side, utilise the extra bolts you inserted during side frame assembly. Insert a glass pane 610 x
457 ref B at the bottom, bolt the louvre to the framework and slide it down so that the bottom cill of the louvre frame is touching the
pane of glass. With the louvre in the open position, insert 5 glass blades from the inside. Insert the upper pane above the louvre.
SECURING GREENHOUSE TO BASE
BRICK BASE, TIMBER OR CONCRETE
Having built your base level and square and to the outside measurements given on page 4, sit the greenhouse onto the base.
The 4 cills will lip over the edge of the base and will protrude approx. 7mm all the way round.
Drill through the cill and into the timber/brickwork; screw through the hole using a treated screw and washer. Create an anchor
point every 610mm i.e. at each glazing bar.