17
If you have a double door option you will need to assemble 2 doors of 457mm width. The doors are assembled in the same way
as the single door with the exception of the doorposts that meet in the middle – these are handed.
Looking at the door posts in profile with the 2 holes at the top (3 holes at the bottom) the open box part of the section goes to the
outside
i.e.: on right hand door – left hand upright
or
on left hand door – right hand upright
The door catches are attached to the upper outer screws (left hand door – top left, right hand door – top right).
Having assembled both doors you need to attach a piece of alloy angle to the rear of one of the handed doorposts. Insert bolts
into the bolt slot of one of the handed doorposts, attach the angle and put on and tighten the nuts.
ASSEMBLY OF THE GREENHOUSE UNIT
PROCEDURE:
1.
With the help of a willing assistant, stand up the rear gable and one of the sides. Standing on the inside of the structure with
the gutter facing away from you, insert the eave/gutter bar into the gap between the corner bars, so that the inside flanges
which form the angle of the roof and side line up with the bolt slots in the corner bars. (Key Point).
2.
Undo the nuts holding the 2 bolts you inserted in the corner bars and slide them into the slotted holes in the flanges. Put a nut
on the top bolt, put the side diagonal brace on the bottom bolt and then the nut and tighten up.
Double door Catch
Insert glazing beading
entire length of inside of
each piece on both doors
