Redmond RMC-M96, Руководство пользователя

Страница: 10 / 16

10
The MASTERCHEF LITE function can be especially useful if you prepare dishes according to complex
recipes that require a combination of different cooking programs (for example, when preparing
cabbage rolls, beef Stroganoff, soups and pasta according to different recipes, jam, etc.).
Changing the temperature during cooking
Range of cooking temperature changes – 35 to 180°С with a 1°С interval. Adjusting temperature
while cooking is exactly like setting the temperature before the start in the “МУЛЬТИПОВАР”
programme.
1. During the operation press the “Температура” button, the default temperature value will
start flashing on the display.
2. Set the temperature value with the and buttons. Switching takes place in a circle.
3. Do not press the buttons on the control panel a few seconds, settings will be saved
automatically (the display will start showing the cooking time again).
For overheat protection when setting the cooking temperature higher than 150°С the maximum
programme operating time is limited to two hours
Changing the time during cooking
The cooking time range and interval depends on the chosen programme (see “Summary Table
of Cooking Programs (Default Settings)”). Adjusting the cooking time while cooking is just like
setting cooking time before the programme begins.
1. Press the “Время” button twice while cooking is in progress, the digital indicator on the
display will start flashing.
2. Set the hour value with the and buttons. Switching takes place in a circle. Press and
hold the corresponding button down to scroll through the digits.
3. To save the changes and set the minute timer, press the “Время” button.
4. In the same way set the minute value. If you do not press the buttons on the panel for
a few second, the changes will be saved automatically (the numbers on the display will
stop flashing). To return to setting hours, press the “Время” button before it auto-saves.
If you set the cooking time to 00:00, the program will be stopped.
While the Time Delay function is running, the MASTERCHEF LITE function is not available.
When changing cooking time and temperature before the device reaches the right temperature
or cooking has finished (if they are provided for in the factory settings), then the preliminary
heating will be interrupted and a programme countdown timer will begin.
Keep Warm Function (automatic heating)
This function automatically activates at the end of cooking, and keeps the food warm at 70-
75°С for 12 hours. The “Разогрев/Отмена” indicator and button indicator is lit with the
enabled Keep Warm, the direct counting of the program time in this mode is displayed.
To disable Keep Warm function press and hold
“Разогрев/Отмена” button. The appliance will
go into the standby mode.
This function is not available on all programmes (see “Summary Table of Cooking Programs
(Default Settings)”).
Preliminary Disabling the Keep Warm Function (automatic heating)
Automatic activation of the Keep Warm function at the end of the program may sometimes
be undesirable. The multicooker allows disabling the function in advance. To do this, while
the cooking program or Time Delay function is running, press the “Старт” button: the indicator
will turn off. To turn on the automatic heating again, press the “Старт” button again.
For your convenience, in case of cooking at temperatures up to 80°C, the automatic heating
function will be disabled by default. If a temperature higher than 80°C is set while a
programme is in progress, the auto-heating will turn on.
Reheat Function
The multicooker can be used for warming up cold meals. To reheat:
1. Fill the bowl with food and position it inside the multicooker.
2. Close the lid and plug in the appliance.
3. Press the “Разогрев/Отмена” button. The “Разогрев/Отмена” button indicator and
indicator will come on , the display will show a countdown timer until it has finished
heating. The appliance will reheat food up to 70–75°С and will keep it warm during
12 hours.
4. To turn off the reheat function press the “Разогрев/Отмена” button again. The appliance
will go into the standby mode.
The Keep Warm and Reheat functions enable the appliance to maintain the temperature of a
dish for 12 hours, however it is not recommended to keep a meal warm for more than 2-3 hours,
because this may affect its flavour.
Summary Table of Cooking Programs (Default Settings)
Program Recommendations for use
Default time
Adjustment range/
increments
Waiting to
access
operating
parameters
Time Delay
Keep W
arm,
h
МУЛЬТИПОВАР
Adjust cooking time and temperature
to cook any dish of your choice
0:30 2 min – 12 h / 1 min

12
ЭКСПРЕСС
Quick cook rice, fluffy water porridge
During operation, the . indicator
is displayed
Au
to
s
hu
t-o
ff
af
te
r c
ompl
et
e
boiling
of
wat
er
РИС/КРУПЫ* Cooking grains and other side dishes 0:25 1 min – 4 h / 1 min  12