SU-I
Quick Install Guide
70-00077-01-03
Proprietary Redline Comm. © 2010
Page 7 of 12 July 23, 2010
Step 4: Connect Power to SU-I
1.
Connect the power adapter to the DC IN port (bottom of
subscriber).
2.
Connect the power adapter to a 110-240 VAC (nominal)
grounded receptacle. The subscriber is not equipped with a
power switch and activates immediately when connected to a
power source.
Figure 6: Subscriber System Connections - Power Connector
Search Mode
When powered-on, a walking LED pattern is displayed while the SU-I
searches for WiMAX base stations. Note: Do not move the SU-I while
the search is in-progress. When the search is completed, the walking
pattern stops and the LEDs indicate received signal strength.
Figure 7:
Subscriber LED Display
Signal Strength
When the SU-I has locked-in on its home base station, the WAN
signal LEDs indicate signal strength. All LEDs are lit to indicate a
strong signal, while a single LED indicates poor signal strength.
Important: A minimum of two LEDs must be lit for acceptable
wireless operation.
4Gon www.4Gon.co.uk [email protected] Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299