SU-I
Quick Install Guide
70-00077-01-03
Proprietary Redline Comm. © 2010
Page 10 of 12 July 23, 2010
Low Signal / No Connection to Base Station
a) The subscriber requires visual line-of-sight (LOS) to receive the
best signal, and must typically be located as close as possible to
a window.
b) Some office buildings use tinted windows to reduce heat. If the
tinting uses metal embedded in the glass, this may act as an RF
shield and greatly reduce the available signal level.
c) For the best signal reception, the polarity of the subscriber
antenna must match the base station antenna. Test the signal
strength with the subscriber standing upright and also on its side.
d) The subscriber is self-install and cannot be configured by the
user. Verify with your service provider that your subscriber is
correctly registered. The subscriber serial number is located
inside the factory-installed desktop mounting foot.
4Gon www.4Gon.co.uk [email protected] Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299