16
STRATO CHARGED ENGINE
GZ25N
6. SERVICE GUIDE
6-17 Mounting of Reed Valve
Check that there is no foreign matter inside the valve
case.
Important:
Check the gap between the valve case and the reed
valve.
Replace with new valve if the gap is larger than
0.2mm (0.008in.), or the valve is distorted.
Screw lock agent shall be applied to the reed valve
and the stopper fixing screw.
The reed valve case has a marking either
S
or
F
.
S
is for the starter side, and
F
for the fan side.
Assembling position shall not be mixed up.
Max. 0.2mm
Reed Valve
6-18 Removal of Clutch Drum
Remove the snap ring on the clutch drum end
using a snap ring pliers (5500-96110).
1) Removing Snap Ring
Snap Ring
Pliers
Snap Ring
Clutch Drum
Housing Assy