meet Federal and California emissions requirement.
Maintenance, replacement or repair of the emission
control devices and system may be performed by any
nonroad engine repair establishment or individual.
EMISSION CONTROL LABEL ABBREVIATIONS
General:
CAL
California
EXH/EVP
Exhaust and Evapora-
tive
REGS
Regulations
DISPL
Displacement
EVAP
Evaporative
SORE
Small off road engines
ECS
Emission control system HRS
Hours
US EPA
United States Environ-
mental Protection Agen-
cy
Exhaust emission control system:
ECM
Engine control
module (Auto-
tune)
OC
Oxidizing Cata-
lyst
EM
Engine modifica-
tion
TWC
Three way cata-
lyst
Evaporative emission control systems:
C
Coextruded (Mul-
tilayer)
P
Treated HDPE or
PE
N
Nylon
S
Sealed
Product liability
As referred to in the product liability laws, we are not
liable for damages that our product causes if:
• the product is incorrectly repaired.
• the product is repaired with parts that are not from
the manufacturer or not approved by the
manufacturer.
• the product has an accessory that is not from the
manufacturer or not approved by the manufacturer.
• the product is not repaired at an approved service
center or by an approved authority.
Safety
Safety definitions
Warnings, cautions and notes are used to point out
specially important parts of the manual.
WARNING:
Used if there is a risk of
injury or death for the operator or bystanders
if the instructions in the manual are not
obeyed.
CAUTION:
Used if there is a risk of
damage to the product, other materials or
the adjacent area if the instructions in the
manual are not obeyed.
Note:
Used to give more information that is necessary
in a given situation.
General safety instructions
WARNING:
Read the warning
instructions that follow before you use the
product.
• Under no circumstances may the design of the
product be modified without the permission of the
manufacturer. Always use genuine accessories.
Non-authorized modifications and/or accessories
can result in serious personal injury or the death of
the operator or others.
• Never use a product that has been modified in any
way from its original specification.
• Never use a product that is faulty. Carry out the
safety checks, maintenance and service instructions
described in this manual. Some maintenance and
service measures must be carried out by trained and
qualified specialists. Refer to
on page 14
for instructions.
• All servicing and repair work on the product requires
special training. This is especially true of the safety
equipment. Never use a product with faulty safety
4
1654 - 002 - 19.04.2021