background image

• 

Disengage blades when not mowing. Shut off 

engine and wait for all parts to come to a full 

stop before cleaning the machine, removing 

the grass catcher or unclogging the discharge 

guard.

•  Do not operate the machine while under the 

influence of alcohol or drugs.

• 

Look for traffic when operating near or going 

across roadways.

•  Use more care when loading or removing the 

machine into a trailer or truck.

•  Always wear eye protection when operating 

machine.

WARNING!

 When using the machine, 

approved personal protective equipment must 

be used. Personal protective equipment cannot 

remove the risk of injury but it will reduce the 

degree of injury if an accident does occur. 

Speak to your retailer for aid in choosing the 

right equipment.

•  Wear correct Personal Protective Equipment 

(PPE) while operating this machine, including 

(at a minimum) sturdy footwear, eye protection, 

and hearing protection. Do not mow in shorts 

and/or footwear with open toes. 

•  Data shows that operators age 60 years and 

above are involved in a large percentage of 

riding mower-related injuries. These operators 

must evaluate if they can safely operate the 

riding mower sufficiently to protect themselves 

and others from serious injury.

•  Obey the manufacturer’s recommendation for 

wheel weights or counterweights.

•  Keep machine free of grass, leaves or other 

debris buildup which can touch hot exhaust or 

engine parts and burn. Do not let the mower 

deck plow leaves or other debris that can cause 

a buildup to occur. Clean oil or fuel spillage 

before operating or storing the machine.

•  Let machine cool before storage.

Personal Safety Equipment

• 

Make sure that first 

aid equipment is 

near at hand when 

using the machine.

•  Do not use the 

machine when 

barefoot.

•  Always wear 

protective shoes or boots. Steel toe caps are 

recommended.

•  Always wear approved protective glasses or a 

full visor when assembling or driving.

•  Always wear gloves when handling the blades.
•  Do not wear loose clothing that can become 

caught in moving parts.

•  Use ear protectors to avoid damage to hearing.

Slope Operation

Slopes are a major cause related to loss of 

control and tip-over accidents, which can result in 

severe injury or death. Operation on slopes 

requires more care. If you cannot back up the 

slope or if you feel uneasy on it, do not mow it.

•  Mow up and down 

slopes (10 degrees 

maximum), not 

across.

•  Look for holes, ruts, 

bumps, rocks, or 

other hidden objects. 

Uneven terrain 

could overturn the machine. Tall grass can hide 

obstacles.

•  Select a low ground speed so it will not be 

necessary to stop while on the slope.

•  Do not mow on wet grass. Tires can lose 

traction.

•  Avoid starting, stopping, or turning on a slope. If 

the tires lose traction, disengage the blades and 

continue slowly straight down the slope.

•  Move slowly and 

gradually on slopes. 

Do not make 

sudden changes in 

speed or direction, 

which could cause 

machine to roll over.

•  Use more care while 

operating machine with grass catchers or other 

attachments; the stability of the machine can be 

effected.

•  Do not use on steep slopes.
•  Do not try to stabilize the machine by putting a 

foot on the ground.

• 

Do not mow near drop-offs, ditches, or 

embankments. The machine could suddenly 

roll over if a wheel is over the edge or the edge 

caves in.

  WARNING! 

Do not drive up or down hills 

with slopes greater than 10 degrees. Do not 

drive across slopes.

8

SAFETY

Содержание 577616913





































Отзывы: