background image

Congratulations

Thank you for purchasing a RedMax ride-

on mower. This machine is built for superior 

efficiency to rapidly mow primarily large areas. 

A control panel easily accessible to the operator 

and a hydrostatic transmission regulated by 

steering controls both contribute to the machine’s 

performance.
This manual is a valuable document. Read the 

contents carefully before using or servicing the 

machine. The following of instructions (use, 

service, maintenance) by all who operate this 

machine is important for the safety of the operator 

and others. It can also considerably increase the 

life span of the machine and increase its resale 

value.
If you sell your machine, be sure to give the 

operator manual to the new owner.

The final chapter of this operator manual provides 

a Service Journal. Make sure that service and 

repair work are documented. A correctly kept 

service journal reduces service costs for the 

maintenance and affects the machine’s resale 

value. Please contact your dealer for more 

information. Take the operator manual along 

when the machine is taken to your dealer for 

service.

General

In this operator manual, left and right, backward 

and forward are used in relation to the machine’s 

usual driving direction.
Continuous dedication to improve our products 

require that specifications and design are subject 

to change without notice.

Driving and Transport on Public Roads

Check applicable road traffic regulations before 

transporting on public roads. If the machine is 

transported, you must always use approved 

fastening equipment and make sure that the 

machine is correctly attached. DO NOT operate 

this machine on public roadways.

Towing

If machine is equipped with a tow hitch, use much 

more caution when towing. Do not let children or 

others in or on the towed equipment. Make wide 

turns to avoid jack-knifing. Travel slowly and leave 

more distance to stop.
Do not tow on sloped ground. The weight of the 

towed equipment may cause loss of traction and 

loss of control.
Follow the manufacturer's recommendation for 

weight limits for towed equipment. Do not tow 

near ditches, canals, and other hazards.

Operating

This machine is constructed only for mowing 

grass on lawns and even ground without 

obstacles such as stones, tree stumps, etc. The 

machine can also be used for other tasks when 

equipped with special accessories provided by 

the manufacturer. Operating instructions for the 

accessories are provided with delivery. All other 

types of uses are incorrect. The manufacturer’s 

directions concerning operation, maintenance, 

and repairs must be carefully followed.
Lawn mowers and all power equipment, can 

be potentially dangerous if used improperly. 

Safety requires good judgement, careful use in 

accordance with these instructions and common 

sense.
The machine must only be operated, maintained, 

and repaired by persons familiar with the 

machine’s special characteristics and who are 

also knowledgeable about the safety instructions. 

Use only approved repair parts to maintain this 

machine.
Accident prevention regulations, other general 

safety regulations, occupational safety rules, and 

traffic regulations must be followed without fail.
Unauthorized modifications to the design of the 

machine may absolve the manufacturer from 

liability for resulting personal injury or property 

damage.

4

INTRODUCTION

Содержание 577616913





































Отзывы: