Installation DA6UIN-B
Drawing No. LP1122
Revised 03/2020
DA Series Universal Analog Input Module
With
6
Isolated
Channels
Installation Guide
1
MODULE PACKAGE CHECKLIST
This product package should contain the items listed below. If
any items are missing or damaged, contact Red Lion immediately.
- DIN rail mount DA 6UIN Module
- Installation Guide
GENERAL DESCRIPTION
The DA 6UIN module is designed for use with the DA70
controllers, that can support up to 10 I/O modules simultaneously.
This module features 6 Universal Analog Inputs operating at
16-bit resolution, which makes it an ideal choice for a data-
acquisition application. The module can accept a wide range of
thermocouples and RTDs, as well as 0/4-20 mA and 0-10 V
Process signals. Each input has a dedicated alarm LED that
indicates a variety of conditions.
The modules connect and communicate via proprietary
backplane to the DA host device. The DA host device, equipped
with serial ports as well as Ethernet port(s), allows the system to
share data with PCs, PLCs, and SCADA systems.
Internal power management circuits allow the module to be
replaced while power is applied, which reduces downtime in the
event of a module failure. All configuration information is stored
locally within the module, as well as in the Host, so replacement
modules do not need to be configured.
CONFIGURATION
The DA 6UIN modules are configured with Windows
®
compatible Crimson
®
software. The software is an easy to use,
graphical interface which provides a means of configuration and
commissioning of new systems, as well as routine module
re-calibration.
ALARMS
There are a total of 6 red Alarm LEDs – one per Universal Input
channel. The 6UIN module Status LED shows general module
health status. Please reference the LED section for a list of LED
functions.
SAFETY SUMMARY
All safety related regulations, local codes and instructions that
appear in this document or on equipment must be observed to
ensure personal safety and to prevent damage to either the
device or equipment connected to it.
Do not use these products to replace proper safety interlocking.
No software-based device (or any other solid-state device) should
ever be designed to be responsible for the maintenance of
personnel safety or consequential equipment not equipped with
safeguards. Red Lion disclaims any responsibility for damages,
either direct or consequential, that result from the use of this
equipment in a manner not specified.
CAUTION: Risk of Danger
Read complete instructions prior to installation and
operation of the unit.
ATTENTION : Risque de danger
Lire les instructions complètes avant l’installation et
l’utilisation de l’appareil.
WARNING - EXPLOSION HAZARD - SUBSTITUTION
OF COMPONENTS MAY IMPAIR SUITABILITY FOR
CLASS I, DIVISION 2
AVERTISSEMENT - DANGER D’EXPLOSION - LE
REMPLACEMENT DE COMPOSANTS PEUT NUIRE À
L’APTITUDE À LA CLASSE I, DIVISION 2
z
Universal inputs accept TC, RTD, 0-5 V, 0-10 V, 0-20 mA,
4-20 mA, 0-50 mV signals
z
Offers complete isolation; inputs, power and Controller
z
Ideal for data acquisition applications
z
Fully isolated design provides reliable operation
z
Configured using Crimson
®
software (version 3.1 or later)
FOR USE IN HAZARDOUS LOCATIONS:
Class I, Division 2, Groups A, B, C, and D
T4
C
US
UL
R
LISTED
IND.CONT. EQ.
E317425
0.49
(12.51)
0.45 (11.50)
4.53 (114.97)
6.22
(157.91)
1.91
(48.51)
1.35
(34.32)
32
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
09
08
07
06
05
04
03
02
01
6.00
(152.40)
DIMENSIONS In inches (mm)
II 3 G Ex ec IIC T4 Gc
DEMKO 20 ATEX 2268X
IECEx UL 20.0007X
