RDL-3100-RMJ
PRODUCT MANUAL
70-00184-05-00
Proprietary Redline Communications © 2017
Page
23
of 25
February 17, 2017
(2) This device must accept any interference received, including interference that
may cause undesired operation.
5.
FCC Information to Users @ FCC 15.21:
Warning: Changes or modifications not expressly approved by Redline
Communications cou
ld void the user’s authority to operate the equipment.
5.1.2 ISED Notices
Deployment in Canada
This Class B Digital apparatus meets all the requirements of the Canadian Interference-
Causing Equipment.
The following notices about deployment in Canada are included in training and
documentation provided to professional installers and operators of the final product:
1.
The final product must be professionally installed.
2.
WARNING -- ISED RF Exposure Warnings
To satisfy ISED RF exposure requirements for RF transmitting devices, the following
distances should be maintained between the antenna of this device and persons
during device operation:
Table 49: ISED: RDL-3100-RMA Recommended Safe Distances
Frequency (MHz)
Deployment
Separation Distance
4900
PMP/PTP
220 cm (86.6") or more
5800
PMP
20 cm (7.9") or more
5800
PTP
220 cm (86.6") or more
To ensure compliance, operation at closer than these distances is not
recommended. The antenna used for this transmitter must not be collocated in
conjunction with any other antenna or transmitter.
The RDL-3100-RMA has been designed to operate with an antenna having a maximum
gain of 32 dBi. Antenna having a higher gain is strictly prohibited per regulations of
ISED. The required antenna impedance is 50 ohms.
This device has been designed to ensure that radio frequency emissions are maintained
within the band of operation under all normal operating conditions listed in this manual.
This device complies with ISED license-exempt RSS standard(s). Operation is subject to
the following two conditions:
1.
This device may not cause interference, and
2.
This device must accept any interference, including interference that may cause
undesired operation of the device.
To reduce potential radio interference to other users, the antenna type and its gain
should be so chosen that the equivalent isotropic radiated power (EIRP) is not more than
that required for successful communication.
Déploiement aux le Canada
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Les avis suivants à propos du déploiement au Canada sont inclus dans la formation et la
documentation fournies aux installateurs professionnels et les opérateurs du produit
final:
1.
Le produit final doit être installé par un professionnel.
2.
AVERTISSEMENT - ISED avertissements d'exposition RF
