Redline Communications AN-50, Руководство пользователя

Страница: 17 / 76

AN-50 System User Manual
Redline Communications …..solving the first mile challenge .
100 – The “100” LED lights solid green when the Ethernet port is operating at 100 Mb/s.
The LED will not illuminate if the port is operating in 10 Mb/s mode. The Ethernet port
automatically selects the speed through auto-negotiation with either the host
computer/server or router/switch.
FD – The “FD” LED illuminates solid green when the LAN connection is operating in Full
Duplex mode. The system automatically selects the duplex mode through auto-
negotiation with the host computer or switch.
Col – The “Col” LED flashes in amber when collisions are detected on the Ethernet port.
D) The LAN Interface
The LAN interface is a 10/100 BaseT Ethernet port, which is used to connect the AN-50
terminal to either the core network or to a host computer. A router or switch is often used
to complete the connection to the core network, as shown in the figure below. Note that
different cables are required for connection to a hub/switch/router or host computer. See
Section 7.4 of this manual for more information regarding installation of the terminal.
Figure 5: LAN Interface
6.1. The AN-50 System’s T-58 Transceiver / Antenna at a Glance
An antenna bracket will always be provided with the system (see example below Figure
6.
Page 17 of 76