Frame assembly.
1. Fold out the plastic corners of the rear frame bar and connect the left and right side frames, then snap
the plastic corner back in to place. Fig 1.
NOTE The rubber feet on the rear frame bar should be facing downwards.
2. Fit together the left and right head frame by pressing in the silver spring clip and slotting the two
sections together. Make sure the silver clip clicks in to the hole. Fig 2.
3. Push the ends of the foot frame in to the upper holes of the head frame joints until they click in place.
Pull the foot frame to ensure it is locked in place. Fig 3.
4. Connect the ends of the side frames in to the lower holes of the head frame by pressing in the silver
clips and pushing together. Ensure the silver clips are seated in their holes by pulling the seat frame. Fig 4.
Seat cover assembly.
5. Slide the seat cover on to the top of the head frame and wrap the bottom around the foot frame. Fig 5.
6. Turn the bouncer over and connect each buckle to the opposite sides so that the flaps cross over.
Pull on the buckles to ensure they are secure. Fig 6.
Fig 1
Fig 4
Fig 2
Fig 3
Parts list
1. Rear frame bar
2. Left side frame
3. Right side frame
4. Left head frame
5. Right head frame
6. Foot frame
7. Seat cover and harness
1
5
4
7
3
2
6
