redgumbrand
.com.au
ASSEMBLY
- INSTALL HANDLES
With the thumb support on the handle facing toward
the outside of the walker...
Insert the handle tube into the main frame tube.
Allow the handle to go down until the press button
contacts the main frame.
Push and hold the press button down whilst pushing
the handle down.
The press button will click into position in the first hole.
The handle position should line up with your wrists,
in a standing position, with your arms relaxed by your side.
Adjust the height of the handle by pushing down the
press button and moving the handle until it is at the
correct height setting.
The range of the handle adjustment
is in 25mm increments, from 830mm to 930mm.
Important Note:
Make sure that the head of the press button
has fully engaged into the hole.
Repeat process for other handle.
5.
