background image

redgumbrand

.com.au

12.

USAGE GUIDELINES 

- CHAIR POSITIONING AND CASTORS

Prior to using the Lift Chair please follow 

these steps to position the chair as required:

- Position the chair on a flat and level floor.

- The lift chair should be placed near 

   a power point if being plugged into

   mains power. We recommend that 

   the chair be plugged directly into the 

   power source where possible.

- Allow sufficient room in front 

and 

  behind the chair for reclining backrest and extending legrest:

   - 

600mm 

from wall

   - 

500mm + in front

- If possible maintain at least 1 metre between the lift chair and other furniture.

- Avoid placing the chair in the direct sun

 (Material colour may fade over time with sunlight).

- DO NOT use lift chair outdoors (Indoor use only).

600mm 

clearance

behind 

chair

IMPORTANT NOTE:

DO NOT use 

your hands to 

lock / unlock castors 

(Potential pinch point)

Please follow these steps to lock and unlock the castors:
1. To lock the castors: using your foot - press down on brake lever

2. To unlock castors: using your foot - push the small tab in towards castor to release brake.

Содержание LC0901





















Отзывы: