10
4.0
GENERAL CONTROLS.
As the machine with tractor is ready for use, an overview of key components on the Turf-
Tidy are explained, as follows, see Fig.5 as well:
1.
Top door hopper.
2.
Opening for air to escape.
3.
Window for checking filling rate op hopper.
4.
Independent moving head, sealed to the hopper.
5.
Lock nuts for access door head.
6.
Jack handle for adjusting working depth head.
7.
Locking plate jack handle. Lift for unlocking.
8.
Electrical switch for switching hydraulic valve from head to hopper or visa versa.
9.
Electrical connector to tractor ( not always included, since standards are different)
10.
Hydraulic quick connector and flow reducer. Use your own connector, DO NOT
REMOVE THE FLOW REDUCER.
11.
Standard PTO shaft pulled version. Optional: Wide angle version when many (tight)
curves are made during the work.
12.
Draw bar connecting plate, bolted on for easy adjustments.
13.
Hole to connect safety D-shackle located on top of gearbox.
•
Secure head every time maintenance and/ or repair is done with the head up.
14.
Turnbuckle to match machine to tractor.
15.
Standard front roller for depth adjustment of the head.
16.
Spring for controlling ground pressure of the head. Is adjustable via chain.
