12
6.0 TRANSPORTING
THE
SPEEDSEED
The user is responsible for the transport of the Speedseed behind the tractor when travelling
on public roads. Check the national traffic rules. In view of the weight of the Speedseed, a
maximum speed of 20 km/h (12.4 mph) should be observed while driving in open fields with
the machine raised. Higher speeds may endanger the driver and/or other people and even
damage the machine.
*
When the machine is in the raised position, at least 20% of the weight of the
tractor should be supported by the front axle.
7.0 DRIVING
SPEED
The driving speed is limited to 12 km/h (7.5 mph).
Higher speeds are not recommended in view of excessive wear and damage that may occur
to the machine due to, for example, rocks in the ground.
8.0 GENERAL
REMARKS ON THE USE OF THE SPEEDSEED.
Some general remarks/tips on the use of the Speedseed.
@ A field can be tilled 2 or 3 times in different directions in order to obtain a higher
seeding density.
@ Do not make sharp turns.
@
When hitting a hard object in the soil, the spike-elements may be
burred/damaged. Try to file burrs away or replace the spike-element.
@
NEVER
drive backwards while the running wheel is on the ground.
9.0 OPERATING
THE
SPEEDSEED
Before using the Speedseed in the field, check the following:
1.
Are there any loose objects in the field? Remove these first.
2.
Are there any slopes? The maximum slope this machine can work on is 20
degrees.
Always work downhill.
3.
Does the ground contain hard objects? If so, use the Speedseed at a low speed
and adjust the working depth.
4.
Is there any danger of flying objects, such as golf balls, which may distract the
attention of the driver? If so, do
NOT
use the Speedseed.
5.
Is there any danger of sinking or sliding away? If so, postpone the work.
6.
If the soil is frozen or very wet, the work should be postponed until the conditions
are more favourable.
10.0 STARTING/STOPPING PROCEDURE
Before starting the seeding, check the machine for the following points:
* While checking the machine/tractor combination must be fully locked to prevent it from
driving/sliding/sinking away. The tractor engine must be switched off.
Check the seeding elements for damage and repair if necessary.
Check the seed spreading by rotating the running wheel 1 time
(counterclockwise).