14
4. Start up the tractor and increase the speed until the correct speed has been reached.
!! Preferably drive in straight lines in connection with possible damage which could
otherwise occur to the surface!!
Stopping is as follows:
1. Reduce the driving speed and lift the machine from the surface.
2. Drive to the next spot and start the working as discussed above.
10.0 EMPTYING OF THE DIRT RECEIVING BIN
Fig. 10
When the dirt receiving bin is full this must be emptied.
This is done according to the following procedure
(See Fig.10)
:
1. Drive the Speed-Clean to the dumping site for collected waste.
!! Make sure the Speed-Clean is blocked properly and cannot move on its own accord
!!
!! Switch off the tractor before continuing !!
2. Open the rotating lock (1)
3. Remove the dirt receiving bin (2) and empty this.
4. Place the dirt receiving bin (2) back in the machine.
5. Close the rotating lock (1).
Remove the waste according to the applicable conditions of the local legislation.
