9
Figure 3
3. Connect the RTC brush to the lifting arms by shifting the connecting
rods
(1)
through the hole of the support frame
(3)
(2
nd
hole from
bottom is standard).
While shifting the connecting rods apply at the front bushes
(4)
and at
the back the washers
(5).
4. Secure the connecting rods
(1)
with the R-clips
(6)
.
5. Take a seat on the RTC tractor and lift the RTC brush with the lifting
handle
(7)
on the RTC tractor and check if the lifting of the RTC brush
works well.
Figure 4
6. Check if the wings
(8)
are adjusted parallel / level to the center deck
(9)
.
If necessary adjust the bolts
(10)
.
