- 10 -
DS3800
Spreading various scatter materials
Different scatter materials require different settings. The
DS3800 RINK disk spreader
can be
adapted to all scatter materials by choosing the following options.
- Rotation of the mechanical shovels (see disc setting for uneven spreading pattern - Fig. 4)
- Regulating the conveyor belt speed using the controller (1) (see page 9 - Fig.1)
- Regulating the conveyor spreading speed using the controller (2) (see page 9 - Fig.1)
- Adjusting the opening A-G of the automatic gate (6) (see page 10 - Fig. 2)
- Increasing or decreasing the driving speed
- When using very moist material and large spreading thickness, the guide plate (7) can be
removed from the spreader (using nut M8) (Fig. 3).
Fig.3: Spreader
Disc setting for uneven spreading pattern
Rotating the spreading disks
The mechanical shovels (8) can be adjusted as needed inside the (Fig. 4) slots.
Material concentration on the outside - set every other disc (8) in direction X
Material concentration on the inside - set every other disc (8) in direction Y
Fig.4: Spreading disc
7
X
X
Y
Y
8
8
