Redexim OVERSEEDER 3D 1275, Руководство пользователя и каталог запчастей, Страница: 10 / 23

10
6. ATTACHING AND DETACHING THE MACHINE
Attaching and detaching the machine has to be done carefully. Follow the instructions below:
Figure 3
6.1 Attaching the machine
Prior to attaching the machine, check the following points:
-
Check whether the machine is undamaged and whether it is safe to attach and use
the machine.
-
Check the machine for unintentionally loose bolts and nuts.
-
Check whether all safety stickers are on the machine and whether these are
undamaged and easily readable. Never use the machine if it has damaged or
unreadable stickers.
The machine should be attached to the tractor in the following manner:
1. Remove the upper 3-point pins (1) and (3) from the machine (see Figure 3) .
2. Carefully drive the tractor backwards until the lifting arms (2) can be attached to the
machine.
!!
Make sure that the tractor and the machine cannot move while you are attaching them !!
!! Switch off the tractor engine before attaching the machine !!
3. Attach the lifting arms (2) to the machine using the 3-point pins (3) . Lock the pins
using the R-clips.
Use the highest possible hole, so that the pulling line of the tractor is optimal for
pulling the machine into the ground.
4. Set the stabilizer of the lifting arms (2) to 100mm lateral stroke.
2
3
1 4
5