10
4.0 ATTACHING THE MACHINE TO THE TRACTOR
Checking procedure before starting to attach the Easy Spread:
Check the Easy Spread for visually discernable damage and repair this if safe
operation of the machine is no longer guaranteed.
Check whether all the nuts and bolts are tight.
Check whether all safety stickers are present on the machine and are not damaged.
NEVER
use the machine without these items.
Figure 7
The Easy Spread can be attached to the tractor by means of the 3-point attachment.
The procedure is as follows
(see Figure 7)
:
1. Remove the locking pins (1 & 2) and the pins (3 & 4).
2. Drive the tractor carefully backwards so that the lower connecting arms (5) can be
attached to the frame.
Make sure that the tractor is blocked well and cannot move on its own
accord!
Switch off the tractor before descending!
3. Using the locking pins (1) and the pins (3), connect the lower connecting arms (5)
with the bottom 3-point connection located on the frame.
4. Set the stabilizer of the tractor to 100 mm lateral stroke.
5. Mount the top rod (6) of your tractor and turn it outward until it reaches the same
height as the 3-point stop connection of the Easy Spread.
6. Connect the top rod (6) to the frame with the pin (4); secure the pin (4) with the
supplied locking pin (2).
7. Screw in the top rod (6) so that the adjustable legs (8) are just released.
