13
4.0
MAINTENANCE
Model
Time frame
Check point / lubricating point Method
104
108
engine/oil filter
Please follow the
instructions from the
engine
manufacturer,
however, change oil
and/or filters at least
once a year
Before each operation
- Check for loose bolts / nuts
- Tighten the loose
bolts / nuts
- Presence and readability of
the safety stickers
- Replace them if not
present / damaged
After each 10 hours of
operation
- Check the tension of the V-
belt
- Adjust the tension
of the V-belt if
necessary
- Check for loose bolts / nuts
- Tighten the loose
bolts / nuts
- Lubricate cam bearings
(Fig.9).
- 2 shots of EP2
After every 100 hours of
operation or annually
- Check for loose bolts / nuts
- Tighten the loose
bolts / nuts
- Check the roll bearings and
the drive line
- Replace these
parts if necessary
- Check the tension / wear of
the V-belt
- Adjust the tension
of the V-belt if
necessary
- Or replace the V-
belt if necessary
- Lubricate spindle and
wheel bearings
- 2 shots of EP2
Fig.9
