Redexim
11
6.2. Detaching the machine
The machine should be detached in the following manner (
see Figure 2
):
1. Place the tractor and the machine on a flat surface.
!!
Make sure that the tractor and the machine cannot move while you are detaching
them !!
!!
Switch off the tractor engine before detaching the machine !!
2. Carefully place the machine on the ground.
3. Loosen the top rod
(3)
and remove it.
4. Loosen the lowest arms
(2)
.
5. Start the tractor and drive off.
7. ADJUSTING THE WORKING DEPTH
The working depth can be adjusted by setting the running wheels. The front side of the machine will
become higher or lower by turning the spindles (
1
) (
see Figure 3
).
Figure 3
Set both sides of the machine at the same height so that it is possible to clean the field evenly. For this
purpose, use the rulers at both sides of the machine.
NEVER
adjust the machine in such a way that it could damage the subsoil.
!
IMPORTANT ! First check the working depth on the subsoil statically before using the
machine!
